MulchSpot / Garden planning

A little planning.
The right amount of mulch.

Measure your beds. Choose your depth. Find out how much you need—and whether a truckload will fit your plans.

01

Your garden areas

Add each bed once. All measurements are in metres.

02

Choose your depth

50–75 mm is a starting range for coarse mulch in established beds. Adjust for your plants and material.

We subtract the existing layer. These depths apply to every area above.

Example estimate

3.75 m³

50 m² × 75 mm of new mulch

3,750litres of mulch
75equivalent 50 L bags

A whole load may be too much

A 5 m³ load is 1.25 m³ more than this estimate. Consider a measured purchase if you cannot use the extra.

Request standby mulch →

Only request a load you can accommodate. Standby delivery and timing are not guaranteed.

Garden coverage ≠ tipping space

Your result is the amount to spread. A fresh pile needs its own safe drop space. Agree the actual volume, access and maximum capacity with the arborist before delivery.

How does your estimate
compare with a load?

Common examples—not selectable delivery sizes. Each filled square represents 1 m³; these are volume diagrams, not pile dimensions.

5 m³

67 m² coverage at 75 mm of new mulch

1.25 m³ above this estimate

10 m³

133 m² coverage at 75 mm of new mulch

6.25 m³ above this estimate

15 m³

200 m² coverage at 75 mm of new mulch

11.25 m³ above this estimate

Actual truck capacities and loads vary. Coverage is approximate, before settlement or handling losses. Volume differences include the optional allowance when selected.

A few things worth knowing

How do I measure an awkward-shaped garden?

Break it into rectangles or circles, without counting overlapping sections twice. Add each section above. If you already know the area, select “I know the area” and enter square metres. Exclude paving, buildings and spaces you will leave bare.

What if I’m topping up existing mulch?

Measure the settled layer in several places and enter a representative existing depth. We calculate only the additional layer. If beds have different existing depths or need different target depths, calculate those groups separately. If the existing layer meets the target, no new mulch is needed by this calculation.

Is more mulch always better?

No. Fine material compacts more readily and may need a thinner layer. Keep trunks, stems and crowns clear, and check that water reaches the soil. Deep values are available for estimating, not as a recommendation. Read our arborist and bush mulch guide for application advice.

How is the estimate calculated?

Rectangle: length × width. Circle: π × (diameter ÷ 2)². Add the areas, then multiply by the additional depth in millimetres and divide by 1,000. The optional allowance multiplies that result by 1.10. One cubic metre equals 1,000 litres; the 50 L bag comparison is rounded up and is a volume comparison, not a product recommendation.

Can I order exactly the amount shown?

This is a planning tool, not a booking. MulchSpot standby loads are often around 5–15 m³, but material, volume and availability vary. Confirm a suitable load with the arborist. If you need a precise quantity or date, a measured purchase from a supplier may suit you better.

Need help getting the garden ready?

Request quotes for tree pruning, stump grinding, garden tidy-ups or mulch spreading. Tell local contractors what needs doing—free to request, with no obligation to hire.

Request tree & garden quotes →

Contractor availability and responses vary. Most requests are limited to three contractor purchases.